Products

One of the industry’s largest baler, shredder and hogger product line; backed by engineering know-how

Balers

With over 100 models to choose from, Balemaster distinguishes itself as a leading innovator of baler technology having designed and installed balers for a wide range of applications worldwide. Our product line addresses the market specific requirements and demands of the customer.

E-Series Baler

E-Series Baler

Balemaster’s E-Series balers offer an ideal combination of accessories to meet your unique waste and recycling requirements. The “E” Series is the flagship of the Balemaster auto-tie baler line.

EO-Series Baler

EO-Series Baler

Balemaster’s EO-Series balers offer an ideal combination of accessories to meet your unique recycling and waste baling requirements. The “EO” Series line features large feed chute openings and heavy duty construction for tough baling applications.

Fat Boy Baler

Fat Boy Baler

The Fat Boy Baler integrates Balemaster’s high density baling technology with 40% more bale size to produce bales that weigh in at over 3500 pounds – that’s nearly twice as much as conventional bales.

HD-60 Series Baler

HD-60 Series Baler

Balemaster’s HD-60 with a specially engineered easy feed manual wire tie system offers an ideal combination of accessories to meet your unique waste and recycling baling requirements. The HD-60 Series balers are heavy duty, horizontal closed door balers.

Closed Door Balers

Closed Door Balers

Balemaster’s “Balewel” Series, Closed door line of balers offers a broad selection to meet your exact waste or recycling baler need. Each model includes 30 standard features that make the Balewel baler line the best choice among closed chamber, manual-tie balers.

Shredders and Hoggers

Balemaster has perfected high performance waste handling with its broad line of quality shredders that complement our line of balers. Our innovative product line reflects our attention to detail, engineering, and customized design.

Low RPM Shredder

Low RPM Shredder

The 1400 Series quiet shredder has been specially engineered to reduce the noise and dust produced in a shredding operation. The unit is equipped with multiple slow speed arbors to produce “hand” size pieces that are ideal for high density baling.

High Production Hogger

High Production Hogger

The 1200 Series Hogger has been specially engineered to use “Cross-Draft” air flow to reduce the likelihood of costly plug-ups and to be able to operate using outside air.

Floor Sweep Shredder

Floor Sweep Shredder

The 1500 Series Floor Sweep Shredder has been specially designed for shredding waste or recycled materials that are too large to be pneumatically conveyed without preparation. The shredder is located on the floor and material can be manually swept into the feed opening.

Piggyback Shredder

The 1000 Series PT or “Piggyback” Mounted Top Feed Shredder has been specially designed for mounting directly above the charging chamber of a Balemaster baler. The shredder’s single “drum-style” arbor will reduce and destroy a variety of bulky paper waste, including whole books, for high density baling.

Specialty Products

Over the years, Balemaster has developed many unique products to further enhance shredding and baling functions.

Fully Automated Fluffer

Fully Automated Fluffer

Mounted on top of the baler’s feed chute, the fluffer helps prepare paper waste for baling by “fluffing” and distributing it evenly in the baler charging chamber.

Metering Conveyor

Metering Conveyor

Our patented “metering” conveyor eliminates time-consuming hand loading. Waste is fed at a uniform rate to either the baler or shredder. Designed for many “dump and run” applications. Available in 36, 42, and 60 inch width.

Plastic Bottle Perforator (PET/HDPE)

This unique product line perforates plastic bottles, allowing air to escape. As a result, the output capacity of the baler is increased by up to 50%. Ideal for high volume bottle handling requirement.

Automatic Can Compactor

Offering a simple way to crush and compact steel and aluminum cans, even ‘rejects’ filled with fluid. Produces a circular 17" diameter bale for easy handling.

Transfer and Storage Systems

We can design and build a system used to accumulate and store finished bales. Used in conjunction with scheduled forklift operations. These can be an asset in facilitating “unmanned” operations.

Request Information

Name*

Please enter your name

Company*

Please enter you company

Email*

Please enter a valid email address.

Phone

Invalid Input

Address*

Please enter your address

City*

Please enter your city

State

Invalid Input

Zip Code

Invalid Input

Country*

Please select your country

Message

Invalid Input

*

Invalid Input

© Balemaster | A Kadant Company

Privacy | Terms | Careers